The Black Friday offer covers all products at 25% off, including acoustic wall panels. Akupanel slats use felt backing to absorb sound and dampen echo in rooms such as living rooms and studies. A feature wall behind a desk needs a different panel count from a full living room wall, and the fixing method depends on the surface beneath it. 

Early access starts before the public offer 

Subscribers who register for WoodUpp Black Friday specials receive a discount code by email and can shop 48 hours before everyone else. Early Access starts on Saturday 21 November at 11:00 SAST. Check the email containing the code before placing an order. 

The public offer opens on 23 November. Black Friday falls on Friday 27 November, so customers can place an order under the campaign before that date. 

Plan quantities before ordering. Count the panels for the chosen wall, then work out the fixings for that surface. Create accessories, including shelves and hooks, also fall within the offer. Include any shelves in the project list alongside the panel count. 

Acoustic panels dampen echo inside a room 

Akupanel uses MDF slats with a surface finish mounted on acoustic felt. The felt absorbs sound that would otherwise reflect around the room. These panels address reverberation within a space rather than stopping sound travelling between adjoining rooms. In a living room, voices might bounce off hard surfaces during conversation. Inside a home cinema, sound might linger after dialogue. 

The finishes include natural wood veneer, wood-like surfaces and solid colours. The category has more than 20 options and variations. Panels can create a feature wall or cover a wider area, with the same slatted construction across the different finishes. 

Panels can cover a single feature wall or a larger surface, and they can also go on a ceiling. Start by measuring the area around a desk or seating. Natural wood veneer varies between panels, so check how neighbouring pieces look together before fixing them. Create shelves and hooks attach between the slats and can be rearranged later. Mark shelf positions alongside the desk height, or mark hook positions in an entrance before deciding how much wall to cover. 

Panel dimensions and fixings determine the order 

The panels come in lengths of 240 cm and 300 cm, with a standard width of 60 cm. Measure the intended surface before choosing a length. Check the height at more than one point along the wall, especially if the floor or ceiling line appears uneven. Note sockets and switches on the same sketch so a panel does not hide a fitting you need to reach. 

Inspect the mounting surface before you fit the panels. Wall panels can attach directly to plaster or masonry, or sit on timber battens, and each approach needs different preparation. 

For a batten frame, use studs that are 45 mm thick and space them 40 cm apart. Leave a 13 mm gap where panels meet. Panels can also attach directly with standard screws or mounting glue, depending on the surface. 

When screwing panels to the wall, allow approximately 15 screws per standard panel and use fixings suited to the wall or supporting timber. A fixing designed for masonry will not necessarily hold in plasterboard. Ceiling panels need secure fixings into a suitable supporting structure. If you are uncertain about the ceiling construction, ask an installer to check it before ordering. 

Plot proposed panel positions on the sketch before cutting around fittings. Measure each cut against the actual wall rather than copying one measurement across every panel. A fine-toothed saw cuts the MDF slats, while a sharp knife trims the felt backing. Keep shelf and hook positions visible so accessories do not obstruct a socket. Divide the measured wall width by the panel width and round up to a whole panel, then check where the final cut edge will land. 

ALSO SEE: Create a lush philodendron wall at home

Create a lush philodendron wall at home